S&H Charges & Helpful Info:
|
TOTAL cost of Rigs Shipping Costs | |||
| $0.01 - $6.99 |
| ||
|
$7.00 - $13.99 |
| ||
| $14.00 - $69.99 |
| ||
| $70.00 - $99.99 |
| ||
| $100 and up |
| ||
Shipping list above represents U.S.A. orders ONLY. International shipping available UPON REQUEST ONLY!
All rigs (within the U.S.A.) to be shipped via USPS 1st Class Mail w/ Delivery Confirmation.
Want or need your rigs quicker???
**USPS 2-3 Day Priority Mail could be arranged!!
For a flat rate of $6.95 I will ship 1-20 rigs via USPS Priority Mail so you can have them sooner!!
20+ rigs I can ship for $3.35 via USPS Priority Mail.
Just let me know and I'll adjust the price difference after you checkout and send you a separate PayPal invoice.
IMPORTANT
**Please remember that I hand tie these rigs. If I do not have your rig(s) available (in stock)
after your purchase
is completed, it may take a few or several days (depending on the size of your order)
to complete your order - even if you want your rigs shipped 2-3 day USPS Priority Mail.
Please keep this in mind when ordering and I will try to contact you ASAP if there will be a delay.
Also, If I am away fishing for fluke in Montauk or elsewhere, it may take a few days to
respond to your order and your order may also be delayed for that reason.
I will do my best to contact you in any case where there may be a delay (except if I'm away already).
WANT INSURANCE? :
Optional (Recommended) Insurance for purchases Totaling:
$1 - $50 = $1.75
$51 - $100 = $2.25
$101+ = $2.75
I will NOT be responsible for lost or damaged rigs.
PLEASE don't contact me after receiving your rig(s) damaged or if the package is 'lost-in-the-mail'
if you do not elect to have the recommended insurance.
Those who do not receive their rig(s) will not receive a refund nor replacement if insurance was not purchased.
Again, I will NOT be responsible for lost or damaged items and refuse to take money out of my pocket because of an error with delivery.
I have no control over the USPS and once the package is shipped it is literally 'out of my hands'.
Rigs(s) to be shipped shortly after payment is received (unless otherwise stated via email)!!
You will most likely (not guaranteed) receive your rig(s) within 1-2 weeks after I receive payment.
Delivery Confirmation # can be tracked at www.USPS.com if there is a delay in your shipment.
Payment Options:
This Website is set up to accept PayPal payments .There is no need to join PayPal in order to use your credit card and all majors cards are accepted there!!
Go to www.PayPal.com for more info. Millions of World Wide customers can't be wrong!
MONEY ORDERS, CASHIER'S CHECKS or Cash
I will accept a M.O., C.C. or cash if you prefer. In order to do this I will have to take your order by phone
and send you my payment address. Please EMAIL ME to do so.
If all else fails and you want an alternative way to purchase my rigs, go to my eBay page
to see my rigs, as well as, other goodies I have for sale ...
Click here to go to my EBAY page NOW!
or click on the My eBay link button at the top of any page!
ORDERING
Browse My RIGS page and make your selections using the handy Add To Cart buttons.
When you are done, click on the "View Cart" button to begin the checkout process.
Make any changes (change quantities, delete items, etc.) and follow the prompts to select payment options.
RETURN POLICY
If you are not happy with your order for some odd reason,
you can return it within 14 days for a full refund -
minus shipping.
You must pay return shipping costs as well which will not be refunded
(unless the rig is somehow defective in some weird way not caused by shipping).
Rigs must be 100% unused and in original packaging to be returned.
Any rig that I feel was exposed to saltwater or handled
improperly
will not be accepted as a return and your money will not be refunded.
If you have any problems please contact me and I will try to correct your problem.
DO NOT return any rigs without first contacting me via email @
Care & Use
Important Info.
Just like anything exposed to saltwater, the hooks, spinners and virtually any metal part
will rust faster if not cared for properly. TIP: Before you put you rig away after you are done
catching the 'big one', rinse the entire rig in fresh water and tap dry with a towel or rag.
Use the zip bag the rig came in as its' storage holder and make sure it is not wet inside.
This little advice will keep your rigs clean and less rust will accumulate after each use.
TIP: If your rigs get kinked or bent 'out-of-shape' due to fishing or packaging and are not
damaged, frayed or cut, hang the hook on a loop-eye or somewhere you won't dull the hook;
grab the swivel end and pull taught. Then, take a hair dryer and hold it quite
close/almost touching the line (make sure not to melt the mono) and heat up the
monofilament for a few seconds in each spot where there is a kink; waving the
blow dryer back and forth. As long as you hold the line taught and heat up
the line, the kinks should come and and your rig will be like new!
My rigs tend to work better in 'deeper' water ('deeper' as in more than 10' deep).
I have fished in the shallower South Shore Bays and on the North Shore of Long Island
where the water is only around 4'-9' deep and found that my rigs
work good, but not as great as they do in the deeper water.
Montauk, Mattituck, Greenport, Freeport, Captree, New Jersey, Rhode Island -
all deep waters I've fished and KILLED!
Because these rigs contain 2 hooks (Hi & Lo), they are not recommended for use on Party Boats -
unless you are a skilled angler. It's bad enough if you tangle with your neighbor with
one hook, but it's a real pain to try and untangle 2 hooks - especially if you or they use braided line.
The Party Boats' Mates and Captain may also get upset if the 2 hooks cause problems.
My favorite way of fishing for fluke with my rigs is to put a piece of 4-5 inch fluke belly
on the bottom hook with a spearing or two (you can use squid and spearing combo as well),
and a short (like 2-3 inches long) piece of belly or squid on the top hook with only
one spearing. If you put 2 spearing or longer strips on the top, your rig may have
a tendency
to tangle - so keep it simple. Keep that in mind when baiting up and you'll
catch more fish with
less tangles as you would with other brand hi-lo rigs!
O yeah, please make sure the fluke belly is legal! Don't cut a small fish
just to get belly. You can get plenty of belly after filleting those
nice keepers you'll catch using a Doormat Fluke Rig™!
BOUNCE THE HELL-OUT-OF-IT!!
Yes, you can still catch fish by just dead-sticking while you drift,
but I, as well as most of the regulars I fish with, bounce, bounce, bounce.
Bouncing seems to attract more fluke.
Tap that sinker on the bottom a lot and don't stop!
You'll notice more bouncing = more fish!
DON'T JERK THE ROD AFTER THAT 1st BITE!
Most of the time you'll just 'rip it out of their mouth' or pull it away from them.
After you get that initial 'hit', give a little line to the fish and after 2-3 seconds,
begin to lift slowly (make sure your reel is locked). Feel that weight??
HOOK THAT FISH!
Most fluke anglers have a tendency to jerk the rod up to try and hook the fish right away.
With fluke, patience is a virtue (unless he's a real Doormat and swallows the whole thing 1st shot!).
Give it a couple of seconds and you won't lose as many fish!
Use your free fish finder/sinker slide!! Slide your fish finder on your line first,
then tie your Doormat Fluke Rig™ to the line via the Spro® swivel and attach your sinker to the fish finder.
You can use a 3-way swivel, but my rigs seem to work a great deal better using a fish finder.
Hope you've enjoyed your shopping experience
and
Website created by Chris Gray.
Please email me at
Chris@DOORMATFlukeRigs.com
for any questions!!
